Industrial oils
PAX semi-synthetic lathe oil is produced from synthetic base oil and special additives and anti-bacterial compounds and is specially designed for metalworking and machining operations under harsh working conditions that require soluble oils with high emulsification stability and no adverse effects on parts. It has been designed and produced partially.
The presence of excellent and homogeneous emulsification increases the working life of the oil and makes it not have problems such as unpleasant smell and skin sensitivity for people in contact.
Paks single-grade motor oil is formulated with mineral base and the best additives, which is suitable for all types of gasoline, non-diesel, light, supercharged, agricultural machinery, and industrial engines, in three grades SAE 30, 40, 50. It is produced and supplied
PAX fully synthetic soluble oil is prepared from imported synthetic base oil and special additives without nitrite and phenol compounds and it is produced for metalworking and cutting of ferrous and non-ferrous metals in different operating conditions. PAX synthetic cutting oil is easily decomposed in the environment and prevents environmental pollution and has the least adverse effects for the user. Depending on the type of application, its mixing rate with water is between 5 and 10% and the resulting solution is usually clear. PAX fully synthetic soluble oil is made from imported synthetic base oil and special additives without nitrite and phenol compounds and is suitable for metalworking operations and Cutting of ferrous and non-ferrous metals has been produced in different operating conditions. PAX synthetic cutting oil is easily decomposed in the environment and prevents environmental pollution and has the least adverse effects for the user. Depending on the type of application, its mixing rate with water is between 5-10% and the resulting solution will usually be transparent.
* Steel and cast iron machining operations
* Turning and drilling
* Cutting and sanding
* Aluminum machining operations
* General metalworking operations
* Omar
Long useful
* Free of phenol and nitrite compounds
* High anti-corrosion power
* Good cooling properties
PAX industrial gear oil is made from high quality paraffinic base oil and special additives for use in industrial gearboxes. This oil with the property of reducing the effect of pressure (EP) is suitable for use in spiral and hypoid gears and gears of steel, cement and rubber industries as well as simple bearings. * Gearboxes and power transmission systems
* Flat bearings under high load
* Conical, spiral, spiral and hypoid ribs
* Circulation systems with difficult working conditions
PAX hydraulic oil is designed from mineral base oil with high viscosity index and additives suitable for use in circulation systems and hydraulic systems and all devices and tools that require hydraulic oil, and the additives in this oil cause the rapid release of air bubbles and also prevent the destruction of hydraulic systems due to the rapid separation of oil from water.
* Industrial hydraulic systems under average working conditions
* Light and heavy presses
* Hydraulic transmission power systems
* Compressors and pumps
* Sustainability
High thermal and oxidation resistance
* Good anti-wear property
* Excellent separation property from water
* Ability to separate air from oil without creating foam
* Excellent filtering capability
PAX circulation oil is a refinery base oil with a high viscosity index and suitable formulation for use in circulation and hydraulic systems such as devices with closed gears, chain wheels, electric pump motors and all tools that require circulation oil (with anti-rust and anti-oxidation additives).
* General circulation and lubrication systems
* Closed gear boxes and crank boxes of all kinds of compressors
* Hydraulic systems and air compressors
* Textile machines and tools and industrial machines that need circulating oil.
* protection
System of oxidation and sludge formation
* Good cooling properties
* Fast separation from water
* Prevent the formation of stable foam
* Anti-rust and anti-foam properties
Multipurpose oil (STOU) Super tractor oil universal) produced by PAX is a multi-grade oil that can meet all the needs of tractors and agricultural machinery for lubricating oils, including engine oil, hydraulic oil, and gear box oil.
* Types of light and heavy tractors
* All kinds of agricultural machines and devices such as combine harvesters
* Small diesel generators
* Gear boxes and power transmission systems
* Ability
Excellent cleaning and suspension
* property of reducing the effect of pressure
* Anti-corrosion and anti-rust property
* Lubrication and cooling
Appropriate
PAX transformer oil with very high oxidation stability, excellent dielectric and very low pour point plays the role of insulation, cooling and lubrication in industrial transformers and electrical equipment. This oil is produced with naphthenic base without additives and is completely free of harmful PCB compounds. Due to its low specific mass and low viscosity, this oil has very high electrical endurance and performs heat transfer well.
* Power plants, oil and gas industries, steel and cement industries
* Types of industrial transfer motors
* Electrical equipment such as rectifiers, switches and circuit breakers
* Endurance
high electric
* Excellent oxidation stability
* Excellent heat transfer properties
* Good dielectric strength
* Low viscosity and specific weight
* Free of harmful PCB compounds
* Very low pour point
The three-purpose oil for machine tools (sliding-gear-hydraulic) is designed to lubricate the moving parts of textile machines. This oil is produced from mineral base oil and anti-wear and anti-friction additives with high pressure resistance properties.
* Sliding machine tools, gears and hydraulic systems
* Gear boxes and hydraulic systems
* Types of bearings
* cool
Excellent lubrication
* Improves the stickiness of the oil filter
* Increasing tolerance against high pressure
* Anti-corrosion properties
Rusty
PAX cutting oil has been formulated and produced specifically for metalworking operations that require the use of pure, water-insoluble oil. Due to the generally harsh conditions of using cutting oil, additives that increase pressure tolerance (EP) are used in the formulation of this oil, and in order to prevent the unpleasant smell caused by the oil exposed to heat, additive sulfur compounds (EP) from other is active
* Tolerance against high pressures
* Avoiding excessive oil consumption
* Increase the useful life of the device
* Production of good quality parts
* No reaction with metals
* Bearing inAgainst high pressures
* Avoiding excessive oil consumption
* Increase the useful life of the device
* Production of good quality parts
* No reaction with metals
PAX thermal oil is produced from base oil with high viscosity index and special additives for thermal systems, and the use of these oils is allowed up to a maximum temperature of 290 degrees Celsius in closed systems.
* Closed heat transfer systems
* Cement and steel industries
* Power plants, refineries and petrochemical complexes
* Coefficient
High heat transfer
* Thermal stability and oxidation stability
* Anti-corrosion and anti-rust property
* Low vapor pressure property
PAX turbine oil is specially designed for water, steam and gas turbines using paraffinic base oil and suitable additives, and the high oxidation stability of this oil makes it work well in the harsh working conditions of gas turbines. The special properties of this oil are good heat resistance, high separation from water and resistance to rust and corrosion.
* Industrial gas turbines
* Paper industries and gas power plants
* Combined cycle turbines
* Hydraulic turbines and turbogenerator
* Sustainability
high heat
* Oxidation stability
* The ability to separate air from oil
* Very good ability to separate water from oil
* Resistance to rust and corrosion
